Unscrew mouthpiece and chamber
Slide mouthpiece over downstem
Screw chamber back in place
Drop bowl piece into mouthpiece hole
Use the silicone base as an air-tight cap

Clean & Care

(Coarse salt and Isopropyl Alcohol) Remove mouthpiece and clean separately. Pour salt and alcohol into downstem and chamber. Seal with large “base” silicone cap. Shake vigorously. Let sit. Shake again. Rinse with water.

When closed, the smoking pipe cover seals the pipe-containing odor and letting you travel with a packed bowl without spilling any herb.

Slide the Cover open to smoke the bowl, slide the cover closed to extinguish the bowl. The smoke then travels down the filtration path, which cools and filters the smoke before it exits the pipe for a smooth and pleasant draw.

Use the airflow control or pipe carb to customize the smoke volume and to clear the smoke at the end of your hit.

Carbs on smoking pipes can be tricky, when you feel as if your lungs are halfway full, release the carb and clear the path pipe.

Pull 'lighter unit' out of 'lighter housing' by pulling on the metal flint wheel.

Locate cotton ball inside the bottom of the lighter unit. Slowly drip lighter fluid(like Zippo) onto cotton until cotton is saturated (3-5 drops).

Insert 'lighter unit' back into 'lighter housing'Wipe any overflow or spilled fluid up- wait 5 minutes for excess fluid to evaporate.

Flick flint and light your doobie.